Biometrics

Alcohol Gas Sensor MQ-3

Alcohol Gas Sensor MQ-3

This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer. It has a high sensitivity and fast response time. Sensor provides an analog resistive output based on alcohol concentration. The drive circuit is very simple, all it needs is one resistor. A simple interface could be a 0-3.3V ADC.

SEN-08880

4,51 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Carbon Monoxide Sensor - MQ-7

Carbon Monoxide Sensor - MQ-7

This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO concentrations anywhere from 20 to 2000ppm.

SEN-09403

3,97 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Fingerprint Scanner

Fingerprint Scanner

The Nitgen RS232 serial fingerprint scanner is a powerful ADSP-BF531 Blackfin based system. This scanner is capable of gathering and storing unique finger prints.

SEN-08839

99,95 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Fingerprint Scanner

Fingerprint Scanner

This is a low-cost finger print scanner with a slide type sensor where the user slides their finger over the scanner. The ARA-ME-01 uses a simple serial interface that makes identifying users by their finger print fast and easy. This scanner is capable of gathering and storing unique finger prints. Simply hold your finger on the optical scanner, query the device over serial, and you will be issued a unique ID. Use that ID within your embedded system to determine access levels, time clocks, door locks, etc.

SEN-08881

76,80 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Fingerprint Scanner - 5V TTL

Fingerprint Scanner - 5V TTL

Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they're usually unreliable or difficult to implement. Well not anymore! We've found this great fingerprint module from ADH-Tech that communicates over TTL Serial so you can easily embed it into your next project.

SEN-11792

45,57 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Gas Sensor Breakout Board

Gas Sensor Breakout Board

Simple breakout board for the MQ - 3, MQ - 4, MQ - 6 and MQ - 7 gas sensors.  All you need is VCC at 5V, GND, and a resistor to an ADC, that is it.

BOB-08891

0,79 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Jumper Wire - MLX to MLX

Jumper Wire - MLX to MLX

This cable interfaces to many 1.25mm (+/-0.05mm) pitch connectors. Comes terminated as a MLX 1.25mm male connector to MLX 1.25mm male connector.

Dimensions: 6.25" (159mm) long

SEN-08976

1,62 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

LPG Gas Sensor - MQ-6

LPG Gas Sensor - MQ-6

This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing  LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm.

SEN-09405

3,97 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Methane CNG Gas Sensor - MQ-4

Methane CNG Gas Sensor - MQ-4

This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing  natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from 200 to 10000ppm.

SEN-09404

3,97 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

MOD-EKG Heart-Rate and EKG Monitor

MOD-EKG Heart-Rate and EKG Monitor

Heart-Rate and EKG Monitor Using the MSP430FG439 development board

30,88 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

MOD-PULSE  Pulseometer / Heart-rate monitor

MOD-PULSE Pulseometer / Heart-rate monitor

PULSEOXMETER AND HEART-RATE MONITOR Using the MSP430FG439 development board

30,88 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Polar Heart Rate Monitor Interface

Polar Heart Rate Monitor Interface

This is a wonderful evaluation board cooperatively designed by danjuliodesigns and SparkFun. The Heart Rate Monitor Interface (HRMI) is an intelligent peripheral device that converts the ECG signal from the Polar Heart Rate Monitor (HRM) into easy-to-use heart rate data.

SEN-08661

45,95 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Polar Heart Rate Receiver

Polar Heart Rate Receiver

The Polar Heart Rate Receiver is a Polar WearLink compatible receiver capable of wirelessly receiving coded heart beat transmissions from a Polar WearLink+ Heart Rate Sensor.  With its standard servo interface pinout (Vss, Vdd, Sig), interfacing with this receiver is very simple - upon receipt of a heart beat signal, a 15 ms pulse is sent on the signal pin.  This receiver also features a longer reception distance, giving you added flexibility in your application.

27,45 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Sharp GP2Y1010AU0F (Optical Dust Sensor)

Sharp GP2Y1010AU0F (Optical Dust Sensor)

Sharp's GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. It is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems.

COM-09689

13,50 EUR - 11,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.