Temperature

DHT11 basic temperature-humidity sensor + extras

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed).

4,84 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

DS18B20+ - Temperature Sensor

Digital 1-Wire temperature sensor (3-Pin TO-92).
Range: -55...+125 °C

2,00 EUR - 1,80 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Evaluation Board for MLX90614 IR Thermometer

This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a STK500 (Arduino) 8MHz bootloader. Code can be loaded through the FTDI basic interface and the Arduino environment.

SEN-10740

42,13 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager

Humidity and Temperature Sensor - SHT15 Breakout

This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens Technology integrates two sensors and readout circuitry on one single chip.

SEN-08257

35,49 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Humidity Sensor - HIH-4030 Breakout

This is a breakout board for Honeywell's HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and, thanks to the sensor's near linear voltage output, the data is very easy to process.

SEN-09569

14,66 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager

Infrared Thermometer - MLX90614

Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614's high accuracy and resolution. It has a huge number of applications including body temperature measurment and movement detection.

SEN-09570

15,97 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

LM35 CZ - Temperature Sensor

Analog temperature sensor (3-Pin TO-92).
Range: -40...+110 °C

3,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

LM35 DZ - Temperature Sensor

Analog temperature sensor (3-Pin TO-92).
Range: 0...+100 °C

1,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

MOD-TC-MK2-31855

K-Type thermocouple interface board with PIC16F1503, MAX31855, UEXT and 0.1'' ICSP connector

14,22 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Temperature Sensor - Waterproof (DS18B20)

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.

SEN-11050

9,41 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Thermocouple Amplifier MAX31855 (MAX6675 upgrade)

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors and level shifting circuitry, all assembled and tested. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard). Goes great with our 1m K-type thermocouple.

16,66 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager

Thermocouple K-type sensor / TC-K-TYPE

Thermocouple K-type sensor -50+700C for MOD-TC

3,51 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Thermocouple Type-K Glass Braid Insulated

36" high temperature Type-K Thermocouple with glass braid insulation.

SEN-00251

12,07 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager

TMP36GT9Z - Temperature Sensor

Analog temperature sensor (3-Pin TO-92).
Range: -40...+125 °C

1,46 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

USB Weather Board

Got weather? This board can handle it. The USB Weather Board includes onboard sensors for barometric pressure, humidity, temperature, and light level. We've also added headers in the new version so you can connect the board to our weather meters (not included), adding sensors for wind speed, wind direction, and rainfall. You can send all this data to a computer or datalogger via mini-USB cable, TTL serial (3.3V), or wirelessly via Bluetooth or XBee (not included). Finally, the board is Arduino-compatible for easy customization.

SEN-10586

118,27 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Weather Meters

This is a simple weather station that includes an anemometer, wind vane, and rain gauge. Includes mounting hardware and RJ11 connections to the sensors.

SEN-08942

60,49 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager