Product from SolderCore

SolderCore Arcade Shield

The Arcade Shield provides a means to connect SolderCore and other 3V3 Arduino modules to a VGA monitor and generate graphics and text at a resolution of 320x240 pixels in color. Unlike many existing LCD shields which suck up all your I/O, the Arcade Shield requires only five pins to communicate using SPI, leaving plenty free for other purposes. And with SPI running with clock speeds up to 40MHz without missing a beat, and a 512-byte graphics pipeline, the Arcade Shield can be getting on with work in parallel with the SolderCore or Arduino!

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore CoreGyro (ITG-3200)

CoreGyro is a SExI-compliant three-axis digital gyroscope based on the ITG-3200. CoreGyro can sense rotational speed of less than 0.5°/sec and up to 2000°/sec. Furthermore, the sensor has a built-in temperature sensor with a measurement range of -30C to +85C. Communication with the module is performed using I2C, up to 400kHz.

only 23,80 EUR instead 42,49 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

SolderCore CoreLight (ISL29023)

CoreLight is a SExI (half width) compliant digital ambient light sensor based on the ISL29023. It can measure ambient light levels from 0.015 lux to 64,000 lux. The ISL29023 provides access to its internal register using the two wire I2C protocol.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore CoreMag (HMC8553)

CoreMag is a half-width SExI-compliant digital three-axis magnetometer based on the HMC8553 from Honeywell. This module provides a quick an easy means to connect this sensor to a micro-controller or development board using the I2C interface. With the right software this module can quickly and easily be used to implement a simple compass module.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore CoreMPU (MPU-6050 + HMC5883L = AHRS)

InvenSense MPU-6050 + Honeywell HMC5883L = AHRS

CoreMPU is a motion processing unit capable of measuring the rate of angular rotation (gyroscope), acceleration (accelerometer) and magnetic field strength (magnetometer) in three axes, giving nine degrees of freedom all in a compact and open form factor. The CoreMPU is integrates two devices: the InvenSense MPU-6050 and the Honeywell HMC5883L. You can use the CoreMPU on its own, as a breakout board, in your applications, or you can drop it into a SenseCore and let CoreBASIC do the heavy lifting!

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore CorePressure (BMP085)

CorePressure is a breakout PCB for the BMP085 from Bosch Sensortec. It uses the standard SExI footprint for quick integration into the hardware platform of your choice.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore CoreTemp (TC77)

CoreTemp is a half-width SExI-compliant digital temperature sensor module with Microchip TC77. This device is fully supported in CoreBASIC using the CORE-TEMP driver.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore CoreTilt (ADXL345)

CoreTilt is a SExI-compliant three-axis digital accelerometer that uses the excellent ADXL345. It can measure forces due to acceleration up to ±16g in x, y, and z axes. CoreTilt provides a convenient hardware platform in a standard footprint to allow rapid prototyping. To hit the ground running, CoreTilt is supported in CoreBASIC which provides a simple software interface to the powerful sensing capabilities of this product.

only 15,00 EUR instead 31,86 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

SolderCore CoreWii (Wii Nunchuk)

The CoreWii is a SExI compliant breakout board for the Wii Nunchuk controller from Nintendo. This classic controller is fully supported in CoreBASIC, so when used with SolderCore you will be up and running in minutes.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore CPU (CoreBASIC Interpreter) - ARM Cortex-M3

High performance rapid prototyping system with an ARM Cortex-M3 processor, Ethernet, uSD and USB.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore LCD-Shield

The LCD shield provides a 2.8", QVGA (320 x 240) touch screen LCD that be used with the SolderCore and other 3V3 compatible Arduino systems. Unlike many existing LCD shields which suck up all your I/O, the SolderCore LCD Shield requires only five pins to communicate using SPI, leaving plenty free for other purposes. And with SPI running with clock speeds up to 40MHz without missing a beat, and a 512-byte graphics pipeline, the LCD Shield can be getting on with work in parallel with the SolderCore or Arduino!

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore SC-2x1 (Arduino Connector)

Two Arduino shaped boards can be placed next to each another.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore SC-2x2 (Arduino Connector)

Two pairs of Arduino shaped boards can be boards placed in a 2-by-2 arrangement.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



SolderCore SenseCore (PCA9655E)

The SenseCore is a SolderCore and Arduino compatible shield developed for rapid sensor integration.

only 9,95 EUR instead 21,24 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.