Product from Tin Can Tools

ARM20cTI20 - cTI 20-pin JTAG Adapter Board

The ARM20cTI20 JTAG adapter board converts the Flyswatter2's ARM 20-pin JTAG interface into a compact TI (cTI) 20-pin JTAG interface for Texas Instruments target boards. 

28,56 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Beacon Board

The Beacon Board is a small LED display accessory board designed for the BeagleBoard or PandaBoard. 

21,25 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

BeagleBone Black JTAG Adapter Kit

The BeagleBone Black comes from the factory without its JTAG connector installed.  This kit provides all of the hardware you need (except solder and soldering iron) to add a cTI 20-pin JTAG connector to the BeagleBone Black.  The kits also includes the ARM20cTI20 JTAG Adapter Board that converts the BeagleBone Black's cTI 20-pin JTAG interface into a standard ARM 20-pin JTAG interface.  You can them connect the Flyswatter2 directly to the BeagleBone Black's JTAG interface.

43,70 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Flyswatter - ARM 20-Pin JTAG Adapter Kit

This kit provides an adapter board that converts the Flyswatter's 14-pin JTAG interface into a standard ARM 20-pin JTAG interface.

20,19 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Flyswatter - BeagleBoard Adapter Kit

This kit provides adapter boards that enable the Flyswatter to interface with the BeagleBoard's JTAG and RS-232 headers.

21,29 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Flyswatter 2 - JTAG Adapter

The Flyswatter2 is a high speed JTAG debugger and programmer designed for ARM and MIPS target boards.  The Flyswatter2 provides a standard 20-pin ARM JTAG interface as well as a RS232 port that can be used to communicate with the target system.

99,73 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Flyswatter2 ARM20ARM14 - ARM 14-pin JTAG Adapter

The ARM20ARM14 JTAG adapter board converts the Flyswatter2's ARM 20-pin JTAG interface into an ARM 14-pin JTAG interface.

24,44 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Flyswatter2 ARM20MIPS14 - MIPS 14-pin JTAG Adapter

The ARM20MIPS14 JTAG adapter board converts the Flyswatter2's ARM 20-pin JTAG interface into an MIPS 14-pin JTAG interface.

24,44 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Flyswatter2 ARM20TI14 - TI 14-pin JTAG Adapter

The ARM20TI14 JTAG adapter board converts the Flyswatter2's ARM 20-pin JTAG interface into a 14-pin JTAG interface for Texas Instruments target boards. 

25,77 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Hammer

The Hammer CPU module is based upon Samsung’s S3C2410A ARM920T processor. It gives you the power of an ARM9 processor in an easy to use modular package. The Hammer CPU module fits into a standard 40 pin DIP socket. It is an ideal platform for code development and prototyping in an embedded environment. You can quickly interface to the Hammer using your standard prototyping tools that are based upon 0.1 inch centers.

only 119,00 EUR instead 145,55 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Hammer Carrier

The Hammer Carrier board is a prototype board designed for use with the 40-pin ARM9 Hammer CPU board.  The board contains a power supply circuit, RS232 serial port, USB host port, USB slave port, a SD/MMC memory card connector, beeper circuit, and a large user prototyping area on 0.100 inch grids.

only 40,46 EUR instead 44,63 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Hammer Kit

The Hammer Kit includes everything you need to start developing with Linux on the 40-pin ARM9 Hammer CPU board.

only 119,00 EUR instead 218,78 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Silverjaw Lure

The Silverjaw Lure is an expansion board for the MinnowBoard Max that plugs into the High Speed Expansion (HSE) connector on the bottom of the MinnowBoard Max.  It adds dual interfaces: mSATA socket and mPCIE socket. The Silverjaw Lure provides switching power supplies (+3VDC & +1.5VDC) so it is very efficent and minimizes the current draw from the MinnowBoard Max's main +5V power supply.

55,55 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Tin Can Tools - SPI Hook

This item has been discontinued by the manufacturer.

The SPI Hook is a dual function utility board: 1) SPI Flashing tool that can read, erase and write to the SPI Flash located on the MinnowBoard Max/Turbot and 2)  adds a virtual RS232 serial port for communicating with the MinnowBoard Max/Turbot.

31,37 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Trainer for BeagleBoard

The Trainer Board is an expansion/breakout board for the BeagleBoard that adds:
I2C, SPI, GPIO, Standard prototyping area, ATmega328

only 50,95 EUR instead 71,40 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Trainer for BeagleBoard-xM

The Trainer-xM Board is an expansion/breakout board for the BeagleBoard-xM that adds:
I2C, SPI, GPIO, Standard prototyping area, ATmega328

only 50,95 EUR instead 71,40 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Zippy Ethernet Combo Board (BeagleBuddy)

The Zippy is a expansion board for the BeagleBoard that provides: Ethernet, SD/MMC, battery backed-up RTC, RS-232 serial port, and a 5V I2C interface for the BeagleBoard.

80,92 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Zippy2 Ethernet Combo Board (KSZ8851SNL-BBE-EVAL)

The Zippy2 (KSZ8851SNL-BBE-EVAL) 10/100 Ethernet Combo Board is an expansion board for the BeagleBoard that adds an Ethernet interface, a second SD/MMC memory card interface, a battery backed-up Real Time Clock, a second RS-232 serial port, and a I²C expansion interface (5V). 

104,72 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.