Abverkauf

LPC4088 QSB Base Board

Das LPC4088 QSB Base Board ermöglicht einen einfachen Aufbau und Start des LPC QuickStart Boards. Das Base Board ergänzt das QuickStart Board mit zusätzlichen Connectoren, sodass vor allem Displays leicht angeschlossen werden können.

35,70 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

LPC4088 QuickStart Board

Entwicklungsboard mit dem LPC4088 ARM Cortex-M4 Controller im DIP44 kompatiblen Design.

70,21 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

LPCXpresso Motor Control Kit

LPCXpresso Motor Control Kit ist ein Starterkit zum Steuern von BLDC, BLAC, Schritt- und Gleichstrommotoren mit den LPCXpresso Boards.

190,40 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

LPCXpresso Prototype Board

Protoboard für die LPCXpresso Boards und mbed Module.

Nur 9,52 EUR Statt 14,28 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

LPCXpresso Value Pack

Das Value Pack enthält eine LPXXpresso Proto Platine, ein 10 zu 20 Pin JTAG Adapter Kabel, sowie ein Mini USB Kabel zum Anschluss des LPCXpresso an den Rechner.

23,80 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

LPD8806 RGB LED Streifen - 60 LEDs/m im Silikonschlauch (5m)

5 Meter wasserdichter RGB LED Schlauch auf Basis des LPD8806 Controllers.

Power: 5V DC und bis zu 4A/m

136,85 EUR incl. 19 % USt zzgl. Versandkosten

27,37 EUR pro Meter

Lagernd, versandfertig in 24 Stunden.

Make a Mind-Controlled Arduino Robot - Use Your Brain as a Remote

"Make a Mind Controlled Arduino Robot" shows you how to build your own. You learn to measure attention level with a NeuroSky headband and send this information into Arduino. You will also build a line-avoiding system into the bot. And, of course, you will build the chassis of your robot from scratch.

Nur 2,14 EUR Statt 6,42 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Make an Arduino-Controlled Robot

Building robots that sense and interact with their environment used to be tricky. Now, Arduino makes it easy. With this book and an Arduino microcontroller and software creation environment, you’ll learn how to build and program a robot that can roam around, sense its environment, and perform a wide variety of tasks.

Nur 7,49 EUR Statt 21,74 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Make: Getting Started with littleBits

Make: Getting Started with littleBits, co-authored by littleBits founder Ayah Bdeir, along with top-selling author Matt Richardson (Getting Started with Raspberry Pi), teaches you just enough electronics to start making things with littleBits, taking you through connecting littleBits to the cloud and programming with its Arduino-compatible module.

Nur 7,49 EUR Statt 19,44 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Make: Ultimate Guide to 3D Printing

The 3D printing revolution is well upon us, with new machines appearing at an amazing rate. With the abundance of information and options out there, how are makers to choose the 3D printer that's right for them? MAKE is here to help, with our Make: Ultimate Guide to 3D Printing. We brought 16 of the top printers to our headquarters and hosted a weekend-long printer shootout staffed by the editors of MAKE and a number of luminaries in the field. We documented out-of-box experiences and subjected the printers to a number of print and torture tests. This issue presents our findings for you in a clear, concise manner.

Nur 3,21 EUR Statt 9,10 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Make: Volume 34

Make Volume 34 takes to the sky, land, and the sea with projects and articles about underwater robots, incredible kites, and easy-to-make robots that are packed with personality. You'll also find features on an ancient and unusual maker material, and an excerpt from Encyclopedia of Electronic Components, a follow-up title to Charles Platt's best-selling book Make: Electronics. You'll get great projects like CoffeeBots (Arduino-controlled coffee can robots), GlueMotor (control your own robots with an iPhone app), AudioBooks (amplified speakers that look like hardbound books), and KAPstan (a kite winch that makes winding kite line a breeze).

Nur 2,14 EUR Statt 7,19 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Make: Volume 36

Do your think Arduino is il migliore? Do you salivate for a piece of Raspberry Pi? Does your tail wag at the idea of a BeagleBone? In MAKE Volume 36, we're taking a deep dive on the boards that are fueling a new smart device revolution. From workshop hobbyists to the innovators taking accessible technology to new levels, people are hungry for the scoop on this rapidly-iterating field, and if you want to get in front of the smartest makers around, this issue is for you.

Nur 2,14 EUR Statt 7,19 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Make: Volume 39

Roboter, die von Makern gebaut werden, können immer einfacher gesteuert werden. Auch die Kommunikation, via Geräuschen oder Gesichtserkennung gewinnt ständig an Bedeutung.

7,19 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Make: Volume 41

A whole issue devoted to toys for makers! Toys are big players in the maker world. From educational (STEM/STEAM) to robotics and science, toys provide stimulation, simulation, and prototyping. Make: Volume 41 highlights the latest games and gadgets that have come from the maker community, and provides hands-on inspiration for making your own tech-infused toys.

Nur 2,14 EUR Statt 7,19 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Make: Volume 42

With 3D printing advancing at an incredible pace, Make: magazine continues to lead with in-depth testing and reviews of the latest machines, newest printing software, and coolest prints and projects to create. This year's crop of printers features sleek, high-tech looks coupled with increasingly sophisticated interfaces that lower the barrier of entry to a wider range of new users. We'll show buyers how to pick the best printer for their needs, how to use it effectively, and how to fix problems when they arise. All this plus the wide-range of projects, features, and columns found in every issue of Make:--it's our annual best-seller, better than ever!

Nur 2,14 EUR Statt 7,19 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Make: Wearable Electronics

Make: Wearable Electronics is intended for those with an interest in physical computing who are looking to create interfaces or systems that live on the body. Perfect for makers new to wearable tech, this book introduces you to the tools, materials, and techniques for creating interactive electronic circuits and embedding them in clothing and other things you can wear.

Nur 10,70 EUR Statt 29,00 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Making Android Accessories with IOIO

Create your own electronic devices with the popular Input-Output board, and control them with your Android phone or tablet. With this concise guide, you willl get started by building four example projects - after that, the possibilities for making your own fun and creative accessories with Android are endless. This book provides the source code and step-by-step instructions you need to build the example projects. All you have to supply is the hardware.

6,00 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Making Things See

This detailed, hands-on guide provides the technical and conceptual information you need to build cool applications with Microsoft’s Kinect, the amazing motion-sensing device that enables computers to see. Through half a dozen meaty projects, you’ll learn how to create gestural interfaces for software, use motion capture for easy 3D character animation, 3D scanning for custom fabrication, and many other applications.

34,24 EUR incl. 7 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MB1003 HRLV-MaxSonar-EZ0

Ultraschall Entfernungsmesser MB1003 HRLV-MaxSonar-EZ0

Auflösung 1mm und 10Hz Abtastfrequenz

42,48 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MB1200: XL-MaxSonar-EZ0

Ultraschall Entfernungsmesser MB1200 XL-MaxSonar-EZ0

50,34 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MB1230: XL-MaxSonar-EZ3

Ultraschall Entfernungsmesser MB1230 XL-MaxSonar-EZ3

47,60 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MB1232 I2CXL-MaxSonar-EZ3

Ultraschall Entfernungsmesser MB1232 I2CXL-MaxSonar-EZ3

Technische Daten:

  • Auflösung 1cm
  • Messbereich: 20-765cm
  • 40Hz Abtastfrequenz
  • I2C Schnittstelle
  • 3-5,5V Versorgungsspannung
  • Stromaufnahme nur 4,4mA im Durchschnitt

44,74 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MB1330 XL-MaxSonar -AE3

Ultraschall Entfernungsmesser MB1330 XL-MaxSonar-AE3

42,45 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MB1340 XL-MaxSonar -AE4

Ultraschall Entfernungsmesser MB1340 XL-MaxSonar-AE4

42,45 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MB7072 XL-MaxSonar-WRA

Ultraschall EntfernungsmesserMB7072 XL-MaxSonar-WRA IP67

111,92 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Metallgehäuse für Raspberry Pi B+ und Pi2 (schwarz)

Metallgehäuse für Raspberry Pi Modell B+ Version in schwarz lackiert.

Das Gehäuse besteht aus Laser geschnittenem und lackiertem Stahlblech, es ermöglicht den Zugang zu den GPIO und auch dem Kamera-Anschluss.

Nur 9,52 EUR Statt 22,00 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Metallgehäuse für Raspberry Pi Modell A+ (schwarz)

Metallgehäuse für Raspberry Pi Modell A+ (schwarz).

Das Gehäuse besteht aus Laser geschnittenem und lackiertem Stahlblech.

22,00 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MI0283QT-2 Adapter (ohne LCD)

Adapter für MI0283QT-2 Display mit TouchPanel (2.8", 240x320 Pixel).

1,19 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MICO Shield für Arduino - Phone Interface

Das MICO Shield erleichtert das Erstellen eines Arduino Projektes, dass mit einem Mobiltelefon gekoppelt werden kann. Dieses Arduino und Mobiltelefon Interface bietet viele neue Möglichkeiten; Projekte, bei denen das Arduino Telefongespräche entgegen nehmen kann.

Nur 23,80 EUR Statt 33,42 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Micro-Controllers - Skill Badge, iron-on patch

Micro-Controllers - Skill Badge, iron-on patch

4,34 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Miniatur WiFi (802.11b/g/n) Modul (Raspberry Pi)

Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to find one that works well with the Pi and Bone without the need of recompiling any kernels: its supported by the Bone's Angstrom installation that comes with each Bone as well as the Adafruit Occidentalis distribution. You'll have wireless Internet in 10 minutes! Works great with 802.11b/g/n networks.

13,09 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MiniPOV 3 Bausatz

The latest MiniPOV kit is for serial ports so more people can use it! If you have a parallel port, you probably want a MiniPOV2 which is identical except for the port used.

18,59 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Mountaineer Ethernet Mainboard

This mainboard is a Mountaineer Group designed and GHI Electronics manufactured .NET Gadgeteer mainboard with integrated Ethernet and USB connectors.

Nur 59,50 EUR Statt 76,11 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Mountaineer USB Mainboard

This mainboard is a Mountaineer Group designed and GHI Electronics manufactured .NET Gadgeteer mainboard with integrated USB connectors and power supply.

57,07 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

MSP430-5510STK - MPS430F5510 Starter Kit

MPS430F5510 starterkit development board with LCD, UEXT, USB, SD-CARD, Battery charger

20,17 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Multimeter - Skill Badge, iron-on patch

Multi-Meter - Skill Badge, iron-on patch

4,34 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Music Shield v2.0 (SeeedStudio)

Music Shield von Seeedstudio auf Basis des VS1053b MP3 Decoders.
Das Shield arbeitet mit allen Arduino Boards zusammen, es ermöglicht sogar die Aufnahme von Audiodaten beim Einsatz auf einem Seeeduino oder Arduino Mega 2560

31,30 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Netduino 10cm Go Bus Kabel (5 Stück)

This is a 10cm cable for use with Netduino Go.

10,71 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Netduino 3 (STM32F4 ARM Cortex-M4)

Netduino is an open source electronics platform using the .NET Micro Framework. Featuring a 32-bit microcontroller and a rich development environment, it is suitable for engineers and hobbyists alike. This combines the ease of high-level coding and the raw features of microcontrollers. Enjoy event-based programming, multi-threading, line-by-line debugging, breakpoints and more!

Nur 23,80 EUR Statt 42,00 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Netduino Go - Button Module

The netduino GO! Button module is a single button. The button class has three features, the pressed and released events, and the ButtonState property.

5,47 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Netduino Go - Piezo Buzzer Module

The netduino GO! Piezo Buzzer module has a single piezo buzzer. The buzzers tone is set using the call SetFrequency.

8,93 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Netduino Go - Potentiometer Module

The netduino GO! potentiometer module has a single potentiometer.

8,93 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Netduino Go - RGB LED Module

The netduino GO! RGB LED module is a single RGB LED, a very bright one! The LED is set to only go up to 33% of its possible brightness

10,71 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Netduino Go - Shield Base Module

The netduino GO! Shield base module is a module which gives you a full fledged netduino (minus barrel jack and usb) using only one of your netduino GO! sockets. The virtualization technology on the netduino GO! allows you to use the shield base as a netduino, and your shields won't know the difference!

The Shield Base adds Arduino shield pin compatibility to your Netduino Go. Just plug it in and access InputPorts, OutputPorts, AnalogInputs, PWMs, and more using standard C# or Visual Basic code.

27,37 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Netduino Go Mainboard

Der Netduino GO ist eine Opensource Elektronik Plattform die zur Programmierung das .NET Micro Framework verwendet. Das Board verfügt über einen 32-bit Mikrokontroller und eine umfangreiche Entwicklungsumgebung und ist somit eine perfekte Lösung für Profis genauso wie Hobby-Anwender.

Nur 23,80 EUR Statt 53,07 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Open Source Hardware - Skill Badge, iron-on patch

Open Source Hardware - Skill Badge, iron-on patch

4,34 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

OS4000-T Breakout

Breakout Board für das OS4000-T Kompassmodul, die Spannungsversorgungs und RX/TX Pins werden im 2,54mm Raster herausgeführt.

BOB-09302

1,89 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Parallax PING))) Halter

Aluminium Halter für den Parallax Ping Ultrashall Entfernungsmesser. Der Halter dient nicht nur der Befestigung, sondern schützt auch den Sensor vor Beschädigungen.

16,66 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Parallax Propeller C3

Das C3 Board (Credit-Card–sized Computer) von Parallax ist in Zusammenarbeit von Parallax, Nurve Networks LLC und André LaMothe entwickelt wurden.

107,10 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Parallax Propeller Hat Decal

Propeller hat logo sticker decal. Die cut in the shape of the Propeller hat. Measures approximately 3" wide by 2.5" tall. Printed on durable white vinyl. Suitable for indoor or outdoor use.

0,94 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.