iMX233-OLinuXino-Micro

Produktbeschreibung

iMX233-OLinuXino-Micro is Single Board Linux computer in very compact form.

FEATURES:

• iMX233 ARM926J processor at 454Mhz
• 64 MB RAM
• SD-card connector for booting the Linux image
• TV PAL/NTSC video output
• 1 USB High Speed Host
• three Buttons
• 2x30 pin GPIO for connection of other hardware
• PCB dimensions: 3.00'' x 1.70'' (76.2mm x 43.2mm)
• Nominal dimensions: 3.40'' x 1.70'' (86.4mm x 43.2mm)

DOCUMENTS:

• iMX233-OLinuXino-MICRO user's manual revision C

HARDWARE:

• https://github.com/OLIMEX/OLINUXINO

• https://github.com/OLIMEX/OLINUXINO
• Open Embedded Linux Kernel with TV-console and peripherial support, instructions how to make bootable SD-card here
• How to Build Debian distribution instructions here and how to make bootable SD-card with Debian rootfs here
• How to Build ARCH Linux distribution instructions here
• How to build Linux Kernel with LTIB (obsolete) here
• Open Embedded layer completed with support for iMX233-OLinuXino
• Linux Kernel 3.X support work in progress
• Android build on iMX233 instructions (in Spanish)
• OpenOCD working script for iMX233 - tested with OpenOCD 0.6.0, ARM-USB-TINY-H and iMX233-SJTAG
• BitBurner software - software used for burning the iMX233 fuses
• Emulation of OLinuXino

• OLinuXino Yahoo Group for discussion and community support
• Freenode #olimex irc channel for OLinuXino development discussions

• My keyboard is not recognized when connected to the USB of OLinuXino-Micro. What is the problem?
• Most keyboards and mice are low-speed USB devices. The USB of OLinuXino-Micro can communicate directly only with High-speed or Full-speed USB devices. A good workaroud is to use a USB hub between your keyboard and OLinuXino-Micro - using such a hub has the additional benefit of providing additional USB slot (which can be used for example to mount flash memories etc.)