Arduino MKR Vidor 4000

74,85 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0320 kg

Hersteller: Arduino

Lagerbestand: 18

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: ABX00022


With the MKR VIDOR 4000 you can configure it the way you want; you can essentially create your own controller board. It comes loaded with hardware and potential: an 8 MB SRAM; a 2 MB QSPI Flash chip — 1 MB allocated for user applications; a Micro HDMI connector; an MIPI camera connector; and Wifi & BLE powered by U-BLOX NINA W10 Series. It also includes the classic MKR interface on which all pins are driven both by SAMD21 and FPGA. Plus, it has a Mini PCI Express connector with up to 25 user programmable pins.

The FPGA contains 16K Logic Elements, 504 KB of embedded RAM, and 56 18x18 bit HW multipliers for high-speed DSP. Each pin can toggle at over 150 MHz and can be configured for functions such as UARTs, (Q)SPI, high resolution/high frequency PWM, quadrature encoder, I2C, I2S, Sigma Delta DAC, etc.

The on-board FPGA can be also used for high-speed DSP operations for audio and video processing. This board also features a Microchip SAMD21. Communication between FPGA and the SAMD21 is seamless.

FPGA     Intel Cyclone 10CL016
    Mini PCI Express port with programmable pins
Camera connector     MIPI camera connector
Circuit Operating Voltage     3.3V
Digital I/O Pins     22 headers + 25 Mini PCI Express
PWM Pins     All Pins
UART     Up to 7 (depends on FPGA configuration)
SPI     Up to 7 (depends on FPGA configuration)
I2C     Up to 7 (depends on FPGA configuration)
Analog Input Pins     n/a
Analog Output Pins     n/a
External Interrupts     n/a
DC Current per I/O Pin     4 or 8 mA
Flash Memory     2 MB
SDRAM     8 MB
EEPROM     n/a
Clock Speed     48 MHz - up to 200 MHz
Video Output     Micro HDMI

Microcontroller     Microchip ATSAMD21 (Arm Cortex-M0+ processor)
Wi-Fi     U-blox Nina-W102
(VIN)     5V
Supported Battery(*)     Li-Po Single Cell, 3.7V, 700mAh Minimum
Circuit Operating Voltage     3.3V
Digital I/O Pins     22
PWM Pins     12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)
UART     1
SPI     1
I2C     1
Analog Input Pins     7 (ADC 8/10/12 bit)
Analog Output Pins     1 (DAC 10 bit)
External Interrupts     8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)
Flash Memory     256 KB
SRAM     32 KB
Clock Speed     32.768 kHz (RTC), 48 MHz
Full-Speed USB Device and Embedded Host     Included
Length     83 mm
Width     25 mm