Didel GM17 Encoder

Produktbeschreibung

The DIDEL ROM-Enco is not just a simple encoder that counts the blips as the wheel turns. It's specially designed to mate with our GM17 gearmotors to offer these features:

• Magnetic encoding detection, not optical!
• Quadrature detection - know if it's going clockwise or counter-clockwise
• 12 pulses per motor rotation * 228:1 gearbox = 2736 pulses per rotation! (Can be reduced to 912 by removed extra magnets)
• Built-in motor driver
  • 3.5 to 6VDC input
  • PWM / PFM input frequency of 500~1000 Hz
  • 800mA drive current (and with this motor, that's plenty of power)
• 6-pin connection interface (0.1" spacing) with
  • 1 - Gnd
  • 2 - Vcc (3.5~6VDC)
  • 3 - Encoder channel 1
  • 4 - Encoder channel 2
  • 5 - Motor control 1
  • 6 - Motor control 2

We must warn you that to mount these encoders into the GM17 requires some skill. It requires some dismantling and modification to the motor body to install the ROM-Enco. Fortunately, DIDEL has put together an excellent step-by-step set of instructions for this purpose.