LPC800 / LPC812 MAX Board

17,85 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0400 kg

Hersteller: Embedded Artists

Lagerbestand: 15

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: EA-XPR-300

Produktbeschreibung

The LPC800 / LPC812 MAX Board (both names are used for this board - it is the same board) combines the features of the LPCXpresso, mbed, and Arduino^TM environments. The board is designed in partnership with mbed and developed by Embedded Artists.

The board is is an easy to use ARM Cortex-M0+ rapid prototyping board that bring togther the best of three platforms:

LPCXpresso Support
The LPCXpresso IDE support programming and debugging the board using the on-board CMSIS-DAP interface, no LPC-Link is needed. The LPCXpresso connector on the board is compatible with existing baseboards.
mbed Support
When connected to a PC, the board will show up as a mass-storage device. Firmware images placed on it will be written to the LPC812 after a power cycle, same as todays mbed boards. The board will also show up as a CMSIS-DAP compatible device allowing users to develop and debug code using any compatible ”off-line” toolchain, such as the ARM-MDK. The mbed SDK has been ported to the board, and it is suppoorted by the on-line compiler.
Arduino Support
Arduino is a popular hobbyist platform, with a standardised set of expansion connectors. The Arduino connectors on the LPC812 MAX board are compatible with the ”Arduino UNO” platform. Several compatible expansion cards (shields) can be bought from various vendors.

LPC800 / LPC812 MAX Board

Processor	NXP's Cortex-M0+ LPC812 microcontroller in TSSOP20 package
Flash Mamory	16 kB
Data Memory	4 kB
Clock Crystal	12.000 MHz crystal for CPU
Dimensions	54 x 78 mm
Power	3.3V external powering, or 5.0V external powering, or 5.0V from USB via mbed HDK debug interface
Connectors	• All relevant LPC812 pins available on LPCXpresso compatible expansion connector (2x27 pin rows, 100 mil pitch, 900 mil between rows) • Arduino compatible expansion connectors (Arduino shields can be mounted) • Serial Expansion Connector, 14-pos connector with UART/I2C/SPI/GPIO pins
Other	• RGB-LED • User push-button • Supported by the LPCXpresso IDE environment • Complete on-board mbed HDK - USB drag-n-drop programming - CMSIS-DAP interface for Cortex debug interface - USB virtual serial bort (functional after modifiying soldered jumpers on the board) • Supported by the mbed SDK and online tools

Further Information

Documents

Software

Pre-loaded Demo Application (just import project into the mbed compiler)

Kunden kauften auch

	Shield-LOL-3mm Rot Nur 10,71 EUR Statt 15,41 EUR
	5mm LED klar weiß 9000-18000mcd 15° 0,50 EUR
	Netduino 3 (STM32F4 ARM Cortex-M4) Nur 23,80 EUR Statt 42,00 EUR
	FTDI Kabel TTL-232R-3V3 USB-Seriell 3,3V (FT232) 20,11 EUR