PIC-ICD2-POCKET - PIC ICD2 Debugger und Programmer

Nur 23,80 EUR Statt 30,88 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0600 kg

Hersteller: Olimex

Lagerbestand: 6

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.



Der PIC-ICD2-POCKET ist einer der kleinsten PIC ICD2 Debugger und Programmer.
Es handelt sich hierbei um einen kostengünstigen real-time Debugger/Programmer, der alle Features (bis auf die RS232 Schnittstelle, denn die Pocket-Version arbeitet nur über USB) des originalen MPBA-ICD2 besitzt.

PIC-ICD2-POCKET is the world's smallest PIC ICD2 debugger and programmer, with only 55 x 55 mm (2.16 x 2.16") dimensions and only 30gr weight (without ICSP cable and packing) this little device fits in your pocket and is very convenient to carry with you when you work in field. PIC-ICD2-POCKET is completely replacement of Microchip's original MPBA-ICD2 and with it you can do everything you can do with the original MPLAB-ICD2, the only difference is that MPLAB-ICD2 have also RS232 while PIC-ICD2-POCKET operates only from USB. PIC-ICD2-POCKET is a low cost, real-time debugger and programmer for selected PIC MCUs and dsPIC DSCs. Programs can be downloaded, executed in real time and examined in detail with the debug functions of MPLAB. Set watch variables and breakpoints from symbolic labels in C or assembly source code, and single step through C source lines or into assembly code. PIC-ICD2-POCKET can also be used as a development programmer for supported MCUs. The secret behind In Circuit Debugging is two dedicated hardware lines (microcontroller pins used only during debugging mode) that control In Circuit Serial Programming (ICSP) of the device and, afterwards, debugging through proprietary, on-chip firmware. The ICD 2 debug features are built into the microcontroller and activated by programming the debug code into the target processor. There is some shared overhead expense that includes one stack level, some general purpose file registers and a small area of program memory.


  • USB (Full Speed 2 M bits/s) interface to host PC
  • Real time background debugging
  • MPLAB IDE GUI (latest release available for free download from Microchip's web site)
  • Built in over-voltage/short circuit monitor
  • Firmware upgradeable from PC
  • Light plastic enclosure
  • Supports low voltage to 2.0 volts. (2.0 to 6.0 range)
  • Diagnostic bi-color LED (Busy, Error)
  • USB power status green LED
  • Reading/Writing memory space and EEDATA areas of target microcontroller
  • Programs configuration bits
  • Erase of program memory space with verification
  • Peripheral freeze-on-halt stops timers at breakpoints
  • Note that ICD2 is not recommended by Microchip for PIC32 microcontrollers and newer designs



PIC ICSP connector (top view)


MPLAB-IDE - supported MPLAB versions up to 8.87 (note that Microchip decided against adding support for PIC-ICD2 in MPLAB X)

Kunden kauften auch

Hartmetallbohrer 1,0mm

Hartmetallbohrer 1,0mm

23,55 EUR

SMD-Klappbox - klein (10 Stück)

SMD-Klappbox - klein (10 Stück)

3,75 EUR - 3,15 EUR