16mm Illuminated Pushbutton - Yellow Latching On/Off Switch

2,14 EUR

incl. 19 % VAT excl. shipping costs

weight: 0.0050 kg

Manufacturer: Adafruit Industries

In stock: 36

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Product.Nr.: ADA1444
     

Product description

A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good.

The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 2.2V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply.

This particular button has a yellow body and LED and is latching on/off. The two switch contacts are either connected or disconnected. When you push the button they will switch from one to the other, like an on-off switch. The LED is separated from the button, so you can make it light up when on, light up when off, always lit, etc.

Customers also purchased

WS2812B - Intelligente RGB LED (10 Stk)

WS2812B - Intelligente RGB LED (10 Stk)

5,00 EUR

Einbautaster 35mm - gelb

Einbautaster 35mm - gelb

2,20 EUR

Einbautaster 35mm - grün

Einbautaster 35mm - grün

2,20 EUR