Raspberry Pi

6 Channel Servo Controller for Raspberry Pi

This board fits over the GPIO pins of Raspberry Pi, and can connect upto 6 servos and/or I2C devices to your Raspberry Pi. This board provides power stabilization for Raspberry Pi, so that any power fluctuations won't cause your Pi to reset. It also provides signal buffering so that you can connect higher voltage servos to the board.

21,63 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Acrylic Case for Raspberry Pi Model B+ and HiFiBerry Digi+

Acrylic Case for Raspberry Pi Model B+ / Raspberry Pi 2 / Raspberry Pi 3 and HifiBerry Digi+

10,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Adafruit DC & Stepper Motor HAT for Raspberry Pi

Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.

24,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Adafruit Half-size Perma-Proto Raspberry Pi Breadboard PCB Kit

We put a PermaProto half sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the PermaProto for Pi! It has the Cobbler baked right in. Simply solder the 2x13 pin header in and you get all the labeled breakouts with tons of prototyping space, power rails, mounting holes and that gorgeous silk.

6,32 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Adafruit Prototyping Pi Plate Kit for Raspberry Pi

Prototyping Pi Plate Kit for Raspberry Pi

17,43 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduCAM 5MP Spy Camera Module with Flex Cable for Raspberry Pi

In order to meet the increasing need of Raspberry Pi compatible camera modules. The ArduCAM team now released another add-on spy camera module for Raspberry Pi series boards which is fully compatible with official one.

34,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduCAM 8MP Sony IMX219 camera with CS lens 2718 for Raspberry Pi

ArduCAM team just released a 8MP Raspberry Pi compatible camera based on the same Sony IMX219 image sensor. It’s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video. It attaches to Pi by the dedicated standard CSi interface.

70,31 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduCAM 8MP Sony IMX219 camera with M12 lens LS40136 for Raspberry Pi

ArduCAM team just released a 8MP Raspberry Pi compatible camera based on the same Sony IMX219 image sensor. It’s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video. It attaches to Pi by the dedicated standard CSi interface.

64,90 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduCAM Multi Kamera Adapter für Raspberry Pi V2.1

Raspberry Pi multi camera adapter V2.1 module is designed for connecting more than one 5MP or 8MP Pi camera to a single CSI camera port on Raspberry Pi board. One adapter board can connect 4 cameras on a single Raspberry Pi board. Please note that Raspberry Pi multi camera adapter board is nascent product that may have some stability issues and limitations because of the cable’s signal integrity and RPi's closed source video core libraries, so use it on your own risk.

55,51 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Bare Conductive Pi CAP

Connect your Raspberry Pi to the physical world!

38,43 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Case for Raspberry Pi B+/Pi2/Pi3 (green)

One-piece folding enclosure with film hinge for the Raspberry PI B+, PI 2 and PI 3 model B boards. Fast installation without tools - simply snap into place.
Made of translucent polypropylene plastic. Already integrated: recess for board interfaces, ventilation slots and holes drilled for wall mounting.

only 5,95 EUR instead 9,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Case for Raspberry Pi B+/Pi2/Pi3 (red)

One-piece folding enclosure with film hinge for the Raspberry PI B+, PI 2 and PI 3 model B boards. Fast installation without tools - simply snap into place.
Made of translucent polypropylene plastic. Already integrated: recess for board interfaces, ventilation slots and holes drilled for wall mounting.

only 5,95 EUR instead 9,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Explorer HAT Pro

Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.

It has digital inputs and outputs, capacitive touch pads, croc. clip compatible pads, coloured LEDs, analog inputs, motor drivers, and a mini breadboard for prototyping your projects.

23,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

HiFiBerry DAC+ - Light Version

The HiFiBerry DAC Light is a high-quality digital-to-analog converter for the Raspberry Pi (newer models with 40 pin GPIO connector). It is designed as a cost-effective alternative to the HiFiBerry DAC+ for price sensitive users, that don't need all features of the HiFiBerry DAC+.

20,11 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

HiFiBerry Digi+ - transformer version

HiFiBerry Digi is a high-quality S/PDIF output for the Raspberry Pi. It uses the I2S sound port that connects directly to the CPU without the need for an additional USB conversion.

35,58 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pi-Blox Multicomp Case for Raspberry Pi B+/Pi2/Pi3 (black)

Multicomp Blox Case for Raspberry Pi B+/Pi2/Pi3 (black)

7,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pi-Blox Multicomp Case for Raspberry Pi B+/Pi2/Pi3 (bue)

Multicomp Blox Case for Raspberry Pi B+/Pi2/Pi3 (blue)

7,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pi-Blox Multicomp Case for Raspberry Pi B+/Pi2/Pi3 (red)

Multicomp Blox Case for Raspberry Pi B+/Pi2/Pi3 (red)

7,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pi-Blox Multicomp Case for Raspberry Pi B+/Pi2/Pi3 (white)

Multicomp Blox Case for Raspberry Pi B+/Pi2/Pi3 (white)

7,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pi-Blox Multicomp Case for Raspberry Pi B+/Pi2/Pi3 (yellow)

Multicomp Blox Case for Raspberry Pi B+/Pi2/Pi3 (yellow)

7,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pimoroni PiGlow

Get visual feedback from your Pi!

The PiGlow is a small add on board for the Raspberry Pi that provides 18 individually controllable LEDs. You can use it for all sorts of things! And of course, it fits inside a Pibow!

only 12,50 EUR instead 13,90 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi 3 Model B Case/Enclosure

Enclosure for Raspberry P3 3 Model B

- For Use With: Raspberry Pi 3 Model B
- External Height: 26mm
- External Width: 71mm
- External Depth: 96mm
- Body Colour: Raspberry, White

8,50 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Raspberry Pi 3 OctoPrint Bundle (OctoPi)

This starter set contains everything to start with OctoPrint.
A part of the sales goes to Gina Häußge to support the development of this open-source project.

The set contains:
- Raspberry Pi 3 Model B (with WiFi/WLAN and Bluetooth)
- TEK-BERRY3 enclosure (black) with OctoPrint logo
- microSD card 8GB with OctoPrint (OctoPi)
- 5.1V / 2.5A Raspberry Pi power supply

65,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Raspberry Pi 3 RPi-Display Bundle

This set contains:

1x Raspberry Pi 3 - 64-Bit Quad Core 1GB Ram
1x power supply microUSB 5,1V - 2,5A
1x RPi-Display 320x240
1x TEK-Berry B+ enclosure black with cut out
1x 8Gb microSD card Jessie

99,50 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Raspberry Pi 3 Starter Set

This set contains:

1x Raspberry Pi 3 - 64-Bit Quad Core 1GB Ram
1x power supply microUSB 5,1V - 2,5A
1x HDMI - HDMI cable 1m
1x TEK-Berry B+ enclosure black
1x 8Gb microSD card Jessie

66,50 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Raspberry Pi 7" Mini-PC Enclosure - black

For use with Raspberry Pi 7 "touch screen and Pi 2 B, Pi B+ or Pi 3 B.

- L 197.12mm x W 115.64mm x H 46.76mm

28,50 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Raspberry Pi 7" Mini-PC Enclosure - transparent

For use with Raspberry Pi 7 "touch screen and Pi 2 B, Pi B+ or Pi 3 B.

- L 197.12mm x W 115.64mm x H 46.76mm

28,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Camera Connection Cable - 1m

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera for a different size.

This cable is 100cm long We have cables in 50cm and 200cm long so you can have the perfect fit.

4,52 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Camera Connection Cable - 2m

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera for a different size.

This cable is 200cm long We have cables in 50cm and 100cm long so you can have the perfect fit. Each order comes with one cable, Pi Camera not included

6,55 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Camera Connection Cable - 50cm

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera for a different size.

This cable is 500mm long We have cables in 100cm and 200cm long so you can have the perfect fit.

2,98 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Raspberry Pi Camera NoIR /w CS mount lens (OV5647)

The Pi NoIR is a Raspberry Pi camera module with no Infrared filter for night time and low light photography using an Infrared light. Useful for wildlife research, science projects, night time security or making artistic photo’s.

36,89 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Camera NoIR /w M12x0.5 mount Lens (OV5647)

The Raspberry Pi camera module has been used for many things such as a security camera, for time lapse photography and even sent high up into the atmosphere on a weather balloon.

34,51 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Camera NoIR v2 (8MP)

RPi Camera, 8MP, without IR filter, with cable

27,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Camera with CS Lens (OV5647)

In order to meet the increasing need of Raspberry Pi compatible camera modules. The ArduCAM team now released a add-on camera module for Raspberry Pi which is fully compatible with official one.

33,32 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Camera with M12x0.5 Lens (OV5647)

In order to meet the increasing need of Raspberry Pi compatible camera modules. The ArduCAM team now released a add-on camera module for Raspberry Pi which is fully compatible with official one.

30,94 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Compute Module 3 Lite

The Compute Module contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM). The Pi 3 has a processor speed of 1.2GHz and runs at roughly 10 times the speed of the Pi 1 due to its quad-core CPU. This is all integrated onto a small 67.6mm x 31mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory). The processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi), and designing the Module into a custom system should be relatively straightforward as we’ve put all the tricky bits onto the Module itself.

only 30,94 EUR instead 32,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Heatsink cooling kit - RPI-COOLKIT

Raspberry pi Heatsink cooling kit

4,95 EUR - 4,35 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Model B+ Heatsink cooling kit

The heat sinks are ideal for use on Top of your Raspberry Pi Modell B+. A thermal tape is also included so you can mount it very easily.

3,57 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspberry Pi Modell B+ Case clear

Clear Raspberry Pi case for Model B+.

only 3,57 EUR instead 6,51 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Raspi Starter Kit (MMBBS)

Raspberry Pi Starter Set for Multi-Media Berufsbildende Schulen Hannover

75,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Raspi Starter Kit (MMBBS) 3B Plus

Raspberry Pi Starter Set for Multi-Media Berufsbildende Schulen Hannover

76,50 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



RPi SmartiPi Kit 2 (red) incl. Camera mount

- Removable LEGO® compatible 6 x 10 top with four color options
- Works with the Raspberry Pi B+or 2 Model B
- Works with GoPro® mounts
- 3 holes that align with 75mm Vesa mounts
- Works with GPIO cables without strain relief
- Includes 4 screws, GoPro® mount bolt, Raspberry Pi case, and Raspberry Pi camera case

12,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

RPi-Display - 2.8" Touch-Display for Raspberry Pi 1 Model A/B

Extend your Raspberry Pi 1 Model A/B with a 2.8" full color display (320x240) with touch panel.
For the display is a Linux framebuffer driver available, so you can use it out of the box.
The Raspberry and LCD can also be mounted in the popular TEK-Berry enclosure, after you have drilled a cut-out for the display.

only 23,80 EUR instead 30,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

RPi-Display B+ Flex Edition (for all Raspberry Pi models)

Extend your Raspberry Pi with a 2.8" full color display (320x240) with touch panel.
The display is connected with a 150mm long flex cable to the Raspberry Pi, so you can mount in your front panel. The kit will be delivered with a 26 and 40 pin connector, you have to solder one of this connectors to the adapter board (it depends on the Raspberry Pi model you have).

34,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

RPi-Shield-Bridge (Raspberry Pi 1 - Arduino adapter)

Raspberry Pi 1 Model A/B to Arduino Shield Bridge

Connect your Arduino Shields to your Raspberry Pi or use our popular MI0283QT- Adapter (2,8“ Color LCD + Touch).

17,95 EUR - 15,01 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Short Crust Case for Raspberry Pi 1 Model B

Short Crust is a case for the Raspberry Pi Modell B which is designed to look attractive, be easy to use and be adaptable for different types of projects. It has a simple and elegant look and is designed to be used with a variety of projects – and look great whilst doing so.

only 16,66 EUR instead 23,80 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Short Crust Plus Case for Raspberry Pi 2, 3 & B+ (black)

Short Crust Plus is the new version of the Short Crust Case designed specifically for the Raspberry Pi Model B+, the Raspberry Pi 2 Model B and the brand new Raspberry Pi 3 (will also work with the Model A+). As with the previous version the case is designed to look attractive, be easy to use and be adaptable for different types of projects. The new case features a tool less design where the ‘smoke’ tinted lid can be easily snapped on and off securely with no rattling. It also features a “snap in place” mounting method for the Raspberry Pi which keeps it very secure, but easy to remove from the case.

14,40 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Short Crust Plus Case for Raspberry Pi 2, 3 & B+ (white)

Short Crust Plus is the new version of the Short Crust Case designed specifically for the Raspberry Pi Model B+, the Raspberry Pi 2 Model B and the brand new Raspberry Pi 3 (will also work with the Model A+). As with the previous version the case is designed to look attractive, be easy to use and be adaptable for different types of projects. The new case features a tool less design where the ‘smoke’ tinted lid can be easily snapped on and off securely with no rattling. It also features a “snap in place” mounting method for the Raspberry Pi which keeps it very secure, but easy to remove from the case.

14,40 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Short Crust Plus Enclosures Spacers (black)

Spacers for the Short Crust Plus enclosures (black)

only 2,98 EUR instead 4,87 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Simple Case for Raspberry Pi Zero - blue transparent

Simple Case for Raspberry Pi Zero - blue transparent

only 1,19 EUR instead 3,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.