M24SR-Discovery - RFID/NFC Dev. Kit

69,26 EUR

incl. 19 % VAT excl. shipping costs

weight: 0.1100 kg

Manufacturer: STMicroelectronics

In stock: 1

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Product.Nr.: 20110821

Product description

Discovery kit for the M24SR series Dynamic NFC/RFID tag

The M24SR-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the M24SR series and is based on the M24SR64 device.
Two versions of this kit are available: the Standard Edition and the Premium Edition. The Premium Edition includes all of the Standard edition features, plus a headset and a Bluetooth module to demonstrate the convenience to pair it with a smartphone via NFC.
The M24SR64 device is a dynamic NFC/RFID tag IC with a dual interface. It embeds a 64 Kbits EEPROM memory. It can be operated from an I²C interface or by a 13.56 MHz RFID reader or an NFC phone.
The I²C interface uses a two-wire serial interface, consisting of a bidirectional data line and a clock line. It behaves as a slave with respect to the I²C protocol.
The RF protocol is compatible with ISO/IEC 14443 Type A and NFC Forum Type 4 Tag. The board is powered through the USB bus. It also includes a microcontroller STM32F103 to drive the EEPROM via I²C and the LCD screen via SPI bus.
The M24SR-DISCOVERY (MB1138) schematics, BOM, gerber files, drivers and firmware can be downloaded from www.st.com.


•Ready-to-use printed circuit board (PCB)

– M24SR64-Y Dynamic NFC/RFID tag
– 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
– STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
– LCD Color Screen (320*200 pixels)
– Different color LEDs
– USB microB connector for board powering
– JTAG connector for microcontroller firmware upgrade and debug
– Joystick for menu selection
•M24SR-DISCO-PREM specific features:
– Bluetooth module with audio outputs connected to Jack 3.5
– Headset

Customers also purchased

Shield-EKG-EMG-PA (Kabelsatz)

Shield-EKG-EMG-PA (Kabelsatz)

11,84 EUR

Bundle: Wattuino Uno + Buch Arduino für Einsteiger (3. Auflage)

Bundle: Wattuino Uno + Buch Arduino für Einsteiger (3. Auflage)

33,33 EUR