Product from Misc

12V / 2A Power Supply (HNP24-120L6)

• power supply with Euro connector
• short circuit protected
• output connctor: 2,1x5,5mm

16x2 LCD RGB - DEM16216FGH-PRGB

• Display contens: 16x2
• Character size: 5,55mm
• Viewing area: 61x15,8mm
• Module size: 80x36mm

16x2 LCD white/blue - DEM16216SBH-PW-N

• High contrast LCD-STN/FSTN display
• Interface for 4- or 8-Bit data bus
• Supply voltage, typ. +5,0V
• Operating temperature range -20...+70°C

16x2 LCD yellow - DEM16216SYH-LY

• Display contens: 16x2
• Character size: 5,55mm
• Viewing area: 61x15,8mm
• Module size: 80x36mm

20x4 LCD Display yellow/black LED-Backl. - DEM20485SYH-LY

• High contrast LCD-STN/FSTN display
• Interface for 4- or 8-Bit data bus
• Supply voltage, typ. +5,0V
• Operating temperature range -20...+70°C

3-12V / 0.6A Power Supply

For use with Arduino Boards.

• Output voltage swicthable (3; 4, 5; 6; 7,5; 9;12V )
• Controll-LED
• cable length: 1,75m
• six different output connectors

50 Pin FFC/ZIF connector 0,5mm pitch

Compatible with Muti-Inno MI0283QT-9 Display.

5V / 1.2A Power Supply (1.3mm DC plug)

5V Power Supply with 1.3mm DC plug.

5V / 1.2A USB Power Supply (HNP06-USB)

• Plug-in switching power supply with europlug
• Universal input
• Protections: short circuit/over load
• Plug: USB-A

5V / 1.6A Power Supply (HNP12-050)

Voltage: 5V
Current: 1,6A
1,2m cable with 2,1mm Connector

5V / 3A Power Supply (HNP18-050)

Voltage: 5V
Current: 3,0A
1,2m cable with 2,1mm Connector

5V / 5A Meanwell switching power supply GS40A05-P1J

SNT extern 25W 5V/5A ErP-2

table power supply
universal access

9V / 0.6A Power Supply

For use with Arduino Boards

• Output voltage: 9V DC
• Cable length: 1,75m
• Output connector: 5,5mm x 2,1mm

AVR32 PIKO Board - AT32UC3B0512

AVR32 Module with Atmel AT32UC3B0512 Microcontroller

Desoldering wick 0,5mm - 1,6m

The braid is applied to the area that needs soldering and heated with a soldering iron. The desoldering braid then absorbs the liquid tin.

Desoldering wick 1,0mm - 1,6m

The braid is applied to the area that needs soldering and heated with a soldering iron. The desoldering braid then absorbs the liquid tin.

Desoldering wick 1mm; 2mm; 2,5mm each 1,6m

Length: 1,6m
Softening Temperature, Min.: 75°C
Flaming Point, Approx.: 180°C (COC)
Ignition Temperature: 273°C (COC)

Desoldering wick 2,0mm - 1,6m

The braid is applied to the area that needs soldering and heated with a soldering iron. The desoldering braid then absorbs the liquid tin.

Desoldering wick 2,5mm - 1,6m

The braid is applied to the area that needs soldering and heated with a soldering iron. The desoldering braid then absorbs the liquid tin.

FSE140S edding Permanent Marker 0,3mm black

Especially made for use on transparent acetate film, plastics, glass, overhead projectors etc.

FSE141F edding Permanent Marker 0,6mm black

Especially made for use on transparent acetate film, plastics, glass, overhead projectors etc.

FSE400 edding Permanent Marker 1mm black

For writing, colouring, labelling on virtually all materials, even metal, glass and plastic

GSM Antenna ANTA7000A0200BD1

The Siretta Multiband antenna combines good performance in a small size, enabling its use with many of today’s GSM/GPRS/3G and 2.4GHz products.

High Density Solution LF-A (400ml Aerosol)

Special composition of additives are linking the toner particles: considerable higher density of the image areas

High Density Solution LF-M (1 litre bottle)

Special composition of additives are linking the toner particles: considerable higher density of the image areas

Jumper Wires F/F 100mm

Jumper wires with two femal connectors in 5 different colors and 100mm (3,9") long.
Form each color are two cables in this pack.

Jumper Wires F/F 200mm

Jumper wires with two femal connectors in 5 different colors and 200mm (7,8") long.
Form each color are two cables in this pack.

Jumper Wires F/F 300mm

Jumper wires with two femal connectors in 5 different colors and 300mm (11,8") long.

Form each color are two cables in this pack.

Jumper Wires F/M 100mm

Jumper wires with a femal and a male connectors in 5 different colors and 100mm (3,9") long.
Form each color are two cables in this pack.

Jumper Wires F/M 200mm

Jumper wires with a femal and a male connectors in 5 different colors and 200mm (7,8") long.

Form each color are two cables in this pack.

Jumper Wires F/M 300mm

Jumper wires with a femal and a male connectors in 5 different colors and 300mm (7,8") long.

Form each color are two cables in this pack.

Jumper Wires for Breadboards (60 pcs)

Low Cost Breadboard Jumper Wire 60pcs pack in 4 different lengths

200mm, 165mm, 125mm and 80mm

Jumper Wires for Breadboards (70 pcs)

Low Cost Breadboard Jumper Wire 70pcs pack in 4 different lengths

200mm, 165mm, 125mm and 80mm

Jumper Wires M/M 100mm (for Breadboards)

Jumper wires for Breadboards in 5 different colors and 100mm (3,9") long.
Form each color are two cables in this pack.

Jumper Wires M/M 200mm (for Breadboards)

Jumper wires for Breadboards in 5 different colors and 200mm (7,8") long.
Form each color are two cables in this pack.

Jumper Wires M/M 300mm (for Breadboards)

Jumper wires for Breadboards in 5 different colors and 300mm (11,8") long.

Form each color are two cables in this pack.

LED clear orange 5000mcd 6° 10mm

EVERLIGHT LEDs

Color: orange
Bulk: 5pcs
Series: EL1363-2
Package: clear 10mm

If = 25mA
Vf = 2,0V

LM 78L05 ACZ

Voltage: 5,0 V
Current up to: 100mA
Package: TO92

1 packaged = 5 pcs

LM35 CZ - Temperature Sensor

Analog temperature sensor (3-Pin TO-92).
Range: -40...+110 °C

LM35 DZ - Temperature Sensor

Analog temperature sensor (3-Pin TO-92).
Range: 0...+100 °C

MCP3008 - 8 channel 10-Bit ADC (SPI)

Need to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy to use, and uses SPI so only 4 pins are required. We chose this chip as a great accompaniment to the Raspberry Pi computer, because its fun to have analog inputs but the Pi does not have an ADC.

MI0283QT-11 - 2.8" TFT Display + Touchpanel

Multi-Inno MI0283QT-11 Display with Touch Panel.
Size: 2.83" and 240x320 pixel

MI0283QT-2 - 2.8" LCD + Touchpanel

Multi-Inno MI0283QT-2 Display with Touch Panel.
Replacement: MI0283QT-9A (pay attention to the Migration Guide)

MI0283QT-9A - 2.8" LCD + Touchpanel

Multi-Inno MI0283QT-9A Display with Touch Panel.
Size: 2.83" and 240x320 pixel

Panasonic (Sanyo) eneloop Mignon AA 2000 mAh battery NiMH - BK-3MCCE

AA 1.2V NiMH battery with up to 2100 charge cycles.

Plastic cleaner Lixtop 200ml Pump Bootle

The general purpose cleaner for removing dirt, tar, nicotine, ink, oil and grease e.g. from plastics housings of office machines, furniture, windows, etc. Anti-static.

S65-Display Connector

Original LCD connector for the Siemens S65-Display (LS020, L2F50, LPH88).

S65-Display Metal Frame

Original Metal Frame for the Siemens S65-Display (LS020, L2F50, LPH88).

Scalpel Blades ES1024 round for ES020M

• Blades made of stainless steel with a high carbon content

Quantity = 4pcs

Scalpel Blades ES1025 straight for ES020M

• Blades made of stainless steel with a high carbon content

Quantity = 4pcs