Flex / Force

Atmel Sensors Xplained Pressure One (ATAVRSBPR1)

ATAVRSBPR1 Sensors Xplained - Pressure One System Board is a part of Atmel's Xplained series of evaluation and development tools that provides a compatible series of Processor Boards, System Boards and Software Environment enabling easy selection and development across a wide range of 8 to 32 bit AVR processor products.


only 14,28 EUR instead 29,75 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

BME280-Breakout (humidity, pressure & temperature sensor)

The BME280 is one of the newest Bosch humidity, pressure and temperature sensor with digital I2C and SPI interface. On the breakout you can find a voltage regulator and level translator, so you can use the board on 3V to 5,5V systems.

14,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

BME680-Breakout (humidity, pressure, temperature & air quality sensor)

The BME680 is one of the newest Bosch Sensortec environmental sensor for humidity, pressure, temperature and indoor air quality sensor with digital I2C/TWI and SPI interface. On the breakout you can find a voltage regulator and level translator, so you can use the board on 3V to 5V systems.

15,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

BMP280-Breakout (Barometric Pressure and Temperature sensor)

The BMP280 is one of the newest Bosch pressure and temperature sensor with digital I2C and SPI interface. On the breakout you can find a voltage regulator and level translator, so you can use the board on 3V to 5,5V systems.

10,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Flex Sensor 4.5

A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad!

SEN-08606

14,16 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Force Sensitive Resistor - Small

This is a small force sensitive resistor. It has a 0.2" (5 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.

sen-09673

6,55 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Force Sensitive Resistor - Square

This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

SEN-09376

11,13 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Force Sensitive Resistor 0.5"

This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

SEN-09375

7,62 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Membrane Potentiometer HotPot - 100mm

When you need to track movement in a volatile environment, HotPot provides a thin and sealed form-factor with operating temperature tolerances of -40 to +85C. The HotPot is the preferred product for industrial and outdoor applications. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip.

SEN-09073

22,55 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Membrane Potentiometer HotPot Rotary

When you need to track movement in a volatile environment, HotPot provides a thin and sealed form-factor with operating temperature tolerances of -40 to +85C. The HotPot is the preferred product for industrial and outdoor applications. By pressing down on various parts of the rotary dial, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the rotary. Can be used as an accurate positional indicator for rotational items, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.

SEN-09074

22,55 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Membrane Potentiometer SoftPot - 100mm

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.

SEN-08607

13,51 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Membrane Potentiometer SoftPot - 200mm

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.

SEN-08679

4,64 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Membrane Potentiometer SoftPot - 50mm

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.

SEN-08680

5,41 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

MOD-Wii-ICSP-NUNCHUCK

The WII NUNCHUCK is a controller for the Wii game console. It has a 3-axis accelerometer, a X-Y Joystick and two buttons. All these features are available through I2C communication, which makes it perfect for connecting through ICSP connector. As these controllers are mass produced for the game industry, they are at an incredibly low cost for the features they offer.

8,27 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Piezo Vibration Sensor - Large

This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.

SEN-09196

3,27 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Piezo Vibration Sensor - Large with Mass

This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.

SEN-09197

3,27 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Piezo Vibration Sensor - Small Horizontal

The Minisense 100 is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back an forth.

SEN-09198

3,27 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.

Piezo Vibration Sensor - Small Vertical

The Minisense 100 is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back an forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.

SEN-09199

3,27 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pressure Sensor Flexiforce - 1 lbs / 0.5 kg

This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing lightly, the resistance changes from infinite to 300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

SEN-08713

21,78 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pressure Sensor Flexiforce - 100 lbs / 45 kg

This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to 300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

SEN-08685

21,78 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pressure Sensor Flexiforce - 25 lbs / 11 kg

This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to 300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

SEN-08712

23,98 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pressure sensor MPX4115AP

The MPX4115A series is designed to sense absolute air pressure in
altimeter or barometer (BAP) applications. Freescale's BAP sensor integrates
on-chip, bipolar op amp circuitry and thin film resistor networks to provide a
high level analog output signal and temperature compensation. The small form
factor and high reliability of on-chip integration makes the Freescale BAP
sensor a logical and economical choice for application designers.

14,96 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Weight Sensor (Load Cell) 0-3kg

Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance and all varieties of commercial scales by single load cell.

11,36 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Weight Sensor (Load Cell) 0-500g

Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance and all varieties of commercial scales by single load cell.

19,40 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Weight Sensor (Load Cell) 0-50kg

Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance and all varieties of commercial scales by single load cell.

10,96 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.