Optical / Light / Image


More categories

5MP MT9P111 1/4-Inch Camera Module

MT9P111 1/4-Inch 5MP System-On-A-Chip (SOC) CMOS Digital Image Sensor Camera Module

16,23 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduCAM 3MP Camera Module OV3640 w/ HQ Lens

3 Mega pixel Camera Module OV3640 w/ HQ Lens

13,17 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduCAM 5MP Mini Camera Board - OV5642

ArduCAM-M-5MP is optimized version of ArduCAM shield Rev.C, and is a high definition 5MP SPI camera, which reduce the complexity of the camera control interface. It integrates 5MP CMOS image sensor OV5642, and provides miniature size, as well as the easy to use hardware interface and open source code library.

43,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduCAM 5MP Spy Camera Module with Flex Cable for Raspberry Pi

In order to meet the increasing need of Raspberry Pi compatible camera modules. The ArduCAM team now released another add-on spy camera module for Raspberry Pi series boards which is fully compatible with official one.

34,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduCAM 8MP Sony IMX219 camera with CS lens 2718 for Raspberry Pi

ArduCAM team just released a 8MP Raspberry Pi compatible camera based on the same Sony IMX219 image sensor. It’s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video. It attaches to Pi by the dedicated standard CSi interface.

70,31 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduCAM Multi-Camera Adapter Board for Arduino

ArduCAM-Mini multi-camera adapter board is designed for using up to 4 ArduCAM-Mini camera boards on a single microcontroller including the Arduino, BeagleBone Black and Raspberry Pi platform. The adapter board can be well mated with these popular open source ardware platform but not limited to them, you can also connect this adapter board to any platform you are familiar with as long as they have a free I2C and SPI interface.

16,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

GHI Serial Camera L1 Module

This Serial Camera (SerCam) Module can stream JPEG images to any gadgeteer mainboard with socket type U. Mainboards with >1MB RAM and JPEG support can view these images on LCD screens, send images on network or save to SD cards or USB drives. Mainboards with less memory and no JPEG support can still use the camera to send images over network or save on SD cards or USB drives.

30,35 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

OV7670 Kamera Module with the AL433 FIFO

The OV7670 is a low cost image sensor + DSP that can operate at a maximum of 30 fps and 640 x 480 ("VGA") resolutions, equivalent to 0.3 Megapixels. The captured image can be pre-processed by the DSP before sending it out. This preprocessing can be configured via the Serial Camera Control Bus (SCCB). It's very useful for Electronic lovers, you can use the camera with STM32 or even with Arduino.

14,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pixy CMUcam Pan/Tilt Kit

Pan/tilt mechanism for Pixy v1.

only 23,80 EUR instead 43,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pixy2 CMUcam Pan/Tilt Kit

The PIxy2 pan-tilt makes a great “hello world” application for Pixy2.  It’s easy to assemble and it gives your Pixy2 something to do: look around!

30,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pixy2 CMUcam5 - Vision Sensor

Pixy2 is the second version of Pixy. It's faster, smaller and more capable than the original Pixy, adding line tracking-following algorithms as well as other features. Here's what we've added to Pixy2:

  • Pixy2 detects lines, intersections and small barcodes, intended for line-following robots
  • Improved framerate – 60 frames-per-second
  • Tracking algorithms have been added to color-based object detection
  • Improved and simplified libraries for Arduino, Raspberry Pi and other controllers
  • Integrated light source

60,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

SparkFun JPEG Trigger - Camera Adapter

The JPEG Trigger interfaces with the LinkSprite JPEG Color Camera to simplify picture taking. To take a picture, all you have to do is pull one of three digital pins to ground (D2, 3 or 4), or pull one of three analog pins to 5V (A0, 1 or 2). The on-board Arduino compatible ATmega328 is programmed to handle all the communication with the JPEG camera and the SD card.

DEV-10549

only 16,66 EUR instead 27,06 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

TCS3200 Color Sensor Module

TCS3200 chip is designed to detect the color of light incident on it. It has an array of photodiode (a matrix of 8x8, so a total 64 sensors).

5,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

TSL237-S-LF-ND

IC LIGHT TO FREQUENCY CONV 3PIN

2,38 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.