StarterKit with Components for Arduino

35,50 EUR

incl. 19 % VAT excl. shipping costs

weight: 1.0000 kg

Manufacturer: Watterott electronic

In stock: 0

Nicht auf Lager.

Nicht auf Lager.

Product.Nr.: 20110509
     

Product description

This Set contains all you need for starting with Arduino and Co.
There is no Microcontroller Board and USB A-B cable included in this kit.

The transparent case has a size from 23,5 x 18 x 4cm so it can fit also your complete projects. A other highlight is the resistor color scale on the bottom side of the case.


Here is the partlist:

1pcs     Component box
1pcs     Straight single line pinhead connectors 2,54 40x1
1pcs     Breadboard, 840 tie points
1pcs     Set of 70 breadboard jumper wires
10pcs   Jumper Wire F/F 100mm
10pcs   Jumper Wire F/M 100mm
10pcs   Jumper Wire M/M 100mm
10pcs   1K Ohm Resistors 1/4W
10pcs   10K Ohm Resistors 1/4W
10pcs   2.2K Ohm Resistor 1/4 W
10pcs   220 Ohm Resistors 1/4W
10pcs   330K Ohm Resistors 1/4W
10pcs   100nF capacitor ceramic
10pcs   10nF capacitor ceramic
5pcs    100uF electrolytic capacitor 25Vdc
1pcs    4,7K Ohm Thermistor
1pcs    24..300K Ohm LDR VT93N1
5pcs    5mm RED LED
5pcs    5mm GREEN LED
5pcs    5mm YELLOW LED
1pcs    10Kohm potentiometer
5pcs    BC547 Transistor in TO92 Package
1pcs    Piezo buzzer
5pcs    PCB Pushbutton, 6x6mm size
2pcs    4N35 Optocoupler DIL-6 package
1pcs    Tilt sensor
5pcs    Diode 1N4007
1pcs    MOSFet Irf540
1pcs    ULN2803 – 8x Darlington Driver
1pcs    Servo
1pcs    7 Segment LED Display
1pcs    74HC595 - Shift Register
1pcs    WS2812 8mm LED

Datasheets and samples