Teensy v3.5 USB Board - ARM Cortex-M4

26,30 EUR

incl. 19 % VAT excl. shipping costs

weight: 0.0035 kg

Manufacturer: PJRC

In stock: 22

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Product.Nr.: 20160127
     

Product description

The Teensy USB Development Board is a complete USB-based microcontoller development system.

Version 3.5 features a 32 bit 120 MHz ARM Cortex-M4 processor with floating point unit. All digital pins are 5 volt tolerant.

All Teensy boards are shipped assembled and fully tested.

Features:
  • 120 MHz ARM Cortex-M4 with Floating Point Unit
  • 512K Flash, 192K RAM, 4K EEPROM
  • Microcontroller Chip MK64FX512VMD12 (PDF link)
  • 1 CAN Bus Port
  • 16 General Purpose DMA Channels
  • 5 Volt Tolerance On All Digital I/O Pins
  • 62 I/O Pins (42 breadboard friendly)
  • 25 Analog Inputs to 2 ADCs with 13 bits resolution
  • 2 Analog Outputs (DACs) with 12 bit resolution
  • 20 PWM Outputs (Teensy 3.6 has 22 PWM)
  • USB Full Speed (12 Mbit/sec) Port
  • Ethernet mac, capable of full 100 Mbit/sec speed
  • Native (4 bit SDIO) micro SD card port
  • I2S Audio Port, 4 Channel Digital Audio Input & Output
  • 14 Hardware Timers
  • Cryptographic Acceleration Unit
  • Random Number Generator
  • CRC Computation Unit
  • 6 Serial Ports (2 with FIFO & Fast Baud Rates)
  • 3 SPI Ports (1 with FIFO)
  • 3 I2C Ports (Teensy 3.6 has a 4th I2C port)
  • Real Time Clock

Customers also purchased

M12x0.5 Kameralinse ohne IR-Filter LS-1620 f=16mm

M12x0.5 Kameralinse ohne IR-Filter LS-1620 f=16mm

8,90 EUR

BME680-Breakout (Luftfeuchtigkeits-, Druck-, Temperatur- & Luftgütesensor)

BME680-Breakout (Luftfeuchtigkeits-, Druck-, Temperatur- & Luftgütesensor)

15,95 EUR

Skalpellhalter ES020M - Metall 135mm

Skalpellhalter ES020M - Metall 135mm

4,29 EUR

Teensy Micro SD Card Adapter

Teensy Micro SD Card Adapter

8,50 EUR

Premium Male/Male Jumper Wires - 40 x 6

Premium Male/Male Jumper Wires - 40 x 6" (150mm)

4,76 EUR