Product from Watterott electronic

40 Pin FFC extenter 0,5mm Pitch - 150mm

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

40 Pin FFC extenter 0,5mm pitch consisting of printed circuit board with 2 FFC connectors and a 150mm long flex cable.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



5" 800x480 HDMI Display with resistive touch

5" 800x480 HDMI Display adapter based on the TI TFP401 and a Atmel ATmega32u4 for controlling the touch screen.

60,95 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



5" 800x480 TFT Display with resistive Touchscreen

5" TFT LCD with RGB Interface and a WVGA resolution of 800x480 pixel and resitive touch screen.
You can use this display also with our HDMI Adapter or RPi-DPI-HAT.

29,75 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

5" 800x480 TFT Display without Touchscreen

 5" TFT LCD with RGB Interface and a WVGA resolution of 800x480 pixel and resitive touch screen.
You can use this display also with our HDMI Adapter or RPi-DPI-HAT.

23,80 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

7" 800x480 HDMI Display with resistive touch

7" 800x480 HDMI Display adapter based on the TI TFP401 and a Atmel ATmega32u4 for controlling the touch screen.

64,95 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



7" 800x480 TFT Display with resistive Touchscreen

7" TFT LCD with RGB Interface and a WVGA resolution of 800x480 pixel and resitive touch screen.
You can use this display also with our HDMI Adapter or RPi-DPI-HAT.

35,70 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Acrylic Case for Raspberry Pi Model B+ and HiFiBerry Digi+

Acrylic Case for Raspberry Pi Model B+ / Raspberry Pi 2 / Raspberry Pi 3 and HifiBerry Digi+

10,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ACS724 Current Sensor Breakout +-10A (AC)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

This is a breakout with the ACS724 current sensor from Allegro MicroSystems.
supply voltage: 5,0V

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



ACS724 Current Sensor Breakout +-20A (AC)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com


This is a breakout with the ACS724 current sensor from Allegro MicroSystems.
supply voltage: 5,0V

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



ACS724 Current Sensor Breakout +-30A (AC)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

This is a breakout with the ACS724 current sensor from Allegro MicroSystems.
supply voltage: 5,0V

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



ACS724 Current Sensor Breakout 20A (DC)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

This is a breakout with the ACS724 current sensor from Allegro MicroSystems.
supply voltage: 5,0V

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



ACS725 Current Sensor Breakout +-20A (AC)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com


This is a breakout with the ACS725 current sensor from Allegro MicroSystems.
supply voltage: 3.3V

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



ACS725 Current Sensor Breakout +-30A (AC)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

This is a breakout with the ACS725 current sensor from Allegro MicroSystems.
supply voltage: 3.3V

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



ACS725 Current Sensor Breakout 10A (DC)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

This is a breakout with the ACS725 current sensor from Allegro MicroSystems.
supply voltage: 3.3V

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



ATWINC1500-Breakout with on-board antenna (WiFi)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com



The ATWINC1500 Breakout is a breakout board with Atmel´s ATWINC1500 WiFi module. OnBoard you find a voltage regulator, level shifter and Atmel´s CryptoAuthentication ATECC508A Chip.
The interface of the board is 3,3V and 5V compatible and you can switch it with a small soldering jumper.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



ATWINC1500-Breakout with u.FL antenna connection (WiFi)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

The ATWINC1500 Breakout is a breakout board with Atmel´s ATWINC1500 WiFi module. OnBoard you find a voltage regulator, level shifter and Atmel´s CryptoAuthentication ATECC508A Chip.
The interface of the board is 3,3V and 5V compatible and you can switch it with a small soldering jumper.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Awesome Shield Invention Kit - with Arduino UNO

Learn to code and invent with Arduino. The inventor’s kit comes with everything you need to get started, including 60+ videos and 6 fun, learning-packed projects!

For inventors aged 10 – 100!

WATCH VIDEOS, LEARN TO CODE

only 47,60 EUR instead 64,99 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Awesome Shield Invention Kit - without Arduino UNO

Learn to code and invent with Arduino. The inventor’s kit comes with everything you need to get started, including 60+ videos and 6 fun, learning-packed projects!

For inventors aged 10 – 100!

WATCH VIDEOS, LEARN TO CODE

only 23,80 EUR instead 39,99 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

BlueFly-Shield (ATWINC1500) - WLAN/WiFi for Arduino

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com


The BlueFly-Shield is a plug-on module with WiFi/WLAN for Arduino.
Compatible with Arduino WiFi101-Shield.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



BME280-Breakout (humidity, pressure & temperature sensor)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

The BME280 is one of the newest Bosch humidity, pressure and temperature sensor with digital I2C and SPI interface. On the breakout you can find a voltage regulator and level translator, so you can use the board on 3V to 5,5V systems.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



BME680-Breakout (humidity, pressure, temperature & air quality sensor)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

The BME680 is one of the newest Bosch Sensortec environmental sensor for humidity, pressure, temperature and indoor air quality sensor with digital I2C/TWI and SPI interface. On the breakout you can find a voltage regulator and level translator, so you can use the board on 3V to 5V systems.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



BMP280-Breakout (Barometric Pressure and Temperature sensor)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

The BMP280 is one of the newest Bosch pressure and temperature sensor with digital I2C and SPI interface. On the breakout you can find a voltage regulator and level translator, so you can use the board on 3V to 5,5V systems.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Breadboard Power Supply 5V/3.3V

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com


Here is a  simple breadboard power supply kit that takes power from a DC wall wart or an microUSB Port and outputs selectable 5V and 3.3V regulated voltage.
The .1" headers are mounted on the bottom of the PCB for simple insertion into a breadboard. Pins labeled + and - plug directly into the power lines.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Bundle: Wattuino 3,3V / 8MHz + FTDI Breakout

This set consists of a:
- Wattuino pro Mini 3,3V / 8MHz
- FTDI Breakout V2

The Wattuino pro mini is an Arduino pro mini compatible clone based on the ATmeag328. In the Set the FTDI Breakout V2 is included, you need it for programming over USB and so you have everything to start together.

15,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Bundle: Wattuino 5V / 16MHz + FTDI Breakout

This set consists of a:
- Wattuino per Mini 5V / 16MHz
- FTDI Breakout V2

The Wattuino pro mini is an Arduino pro mini compatible clone based on the ATmeag328. In the Set the FTDI Breakout V2 is included, you need it for programming over USB and so you have everything to start together.

15,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Bundle: Wattuino Uno + Book Arduino für Einsteiger (3. Auflage)

This bundle contains a Wattuino Uno and the German Book: Arduino fuer Einsteiger (3. Auflage)

33,33 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

CAM-M8Q-Breakout Multi GNSS Module (GPS, QZSS, GLONASS, BeiDou, Galileo)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com


This is a breakout board with the u-blox CAM-M8Q Multi GNSS Module for GPS, QZSS, GLONASS, BeiDou and Galileo data.
On the breakout you find the u-blox CAM-M8Q module, a CR1225 battery holder for the backup battery and two u.Fl connectors.
The u.Fl connectors are connected to the antenna in- and output of the CAM-M8Q.
It has a easy to use UART, SPI and DDC (I2C) interface, so you can use it in different applications.
All pins are brought out as 2,54mm pitch pin header.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



CANdiy-Shield V2 - CAN-Bus Shield

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

The CANdiy-Shield is a CAN extension for Arduino.
The Shield is based on the Microchip MCP2515 CAN-Controller and MCP2562 CAN-Transceiver.
On the Shield is a proto area for own extensions.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



CP2102N Breakout Light (Silabs CP2102N)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

The CP2102N-Breakout is an USB to Serial Adapter with Silicon Labs Chipset (5V and 3.3V).
The 6-pin connector is not included.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Ding & Dent Production Builds and Protoypes

Ding & Dent Production Builds and Protoypes

1,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Drawdio Kit

Drawdio is an electronic pencil that lets you make music while you draw. It's a great project for beginners: An easy soldering kit with instant gratification. Essentially, its a very simple musical synthesizer that uses the conductive properties of pencil graphite to create different sounds. The result is a fun toy that lets you draw musical instruments on any piece of paper. The original design/idea is from Jay Silver.

15,00 EUR - 13,09 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



EduWear Kit (wearable technology)

Wearable intelligence - for clothes, sports and games

Through the EduWear EU project, Smart Textiles have become an important component of the TechKreativ program. As part of this project, a toolkit was developed, which is supposed to make access to Information and Communication Technology easier. In this context young people can actively shape and co-design technologies and learn how to use them in a confident and competent manner.

104,50 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



ESP-WROOM-02-Breakout - ESP8266 WiFi

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com


ESP-WROOM-02-Breakout with Espressif ESP8266 WiFi SoC.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



ESP-WROOM-32-Breakout - ESP32 WiFi+Bluetooth

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com


ESP-WROOM-32-Breakout with Espressif ESP32 WiFi+Bluetooth SoC.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



FabScan Pi Housing Parts V2

Here we have the laser cutted wood parts for assembling the FabScan Pi kit.

33,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

FabScan Pi Kit with Raspberry Pi 3

Here we have the laser cutted wood parts for assembling the FabScan Pi kit incl. the electronics.

185,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



FabScan Pi Kit without Raspberry Pi

Here we have the laser cutted wood parts for assembling the FabScan Pi kit incl. the electronics.

145,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



FabScan Pi Kit without Raspberry Pi & Camera

Here we have the laser cutted wood parts for assembling the FabScan Pi kit incl. the electronics.

122,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



FabScan Pi Screw-Set

Screw set for FabScan Pi Kit

2,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

FabScan-Shield (only PCB)

FabScan-Shield PCB

This is only the PCB from the FabScan-Shield, no other parts included.

2,98 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

FabScan-Shield for Stepper Motor Driver

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com



The FabScan-Shield is a Arduino plug-on module for 3D laser scanning.

You can use this shield also as universal motor controller, because you can add up to 4 Pololu A4988/SilentStepSticks or you can connect up to 4 servo motors.
You can combine stepper and servo motors, but the maximum is 4 motors.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



FTDI Breakout (FT231X) - USB-Serial-Converter

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

This is a basic breakout board for the FTDI FT231X USB to serial IC.
Switchable between 3.3V and 5V.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



FTDI Breakout Light (FT231X) - USB-Serial-Converter

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

This is a basic breakout board for the FTDI FT231X USB to serial IC (switchable between 3.3V and 5V).
The 6-pin connector is not included.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



GLCD-Shield with Display and Joystick

The GLCD-Shield is a plug-on module with color display (128x128 pixel) and joystick for Arduino.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



GLCD-Shield with Display and Rotary Encoder

The GLCD-Shield is a plug-on module with color display (128x128) and rotary encoder for Arduino.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



GPIO Adapter for RPi-Display B+

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com


With this adapter you can convert the 40 Raspberry Pi B+ GPIOs from the 40 pin ZIF/FFC connector on our RPi-Display BPlus to the standard 2x20pin 0.1" connector.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



HDC1080-Breakout (Humidity and Temperature Sensor)

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com


The HDC1080 is a digital humidity and temperature sensor with a I2C interface.
You can use the sensor on 3,3V and 5V system with a low current from 1.3 μA @ 1sps, (11 bit RH and Temperature Measurement).

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



HDMI/DVI - RGB Adapter (CTP) with ATmega32U4 Touchcontroller

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

Universal HDMI Adapter for different TFT screens, based on the TI TFP401 IC and a Atmel ATmega32u4 for controlling the Touchscreen.

0,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



HDMI/DVI - RGB Adapter (RTP) with ATmega32U4 Touchcontroller

Please use our new shop system for ordering this product, this link goes direct to the new shop: shop.watterott.com

Universal HDMI Adapter for different TFT screens, based on the TI TFP401 IC and a Atmel ATmega32u4 for controlling the Touchscreen.

34,00 EUR - 30,94 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



InfoSphere Kit

Arduino, Steckboard, Taschenlampe, USB-Kabel und jede Menge Komponenten nach Stationen sortiert: In der grauen Kiste ist alles übersichtlich enthalten, was man für den Arduino-Workshop im Rahmen der BMBF-Initiative „Make Light“ benötigt.

Eine Doku ist hier zu finden:

schuelerlabor.informatik.rwth-aachen.de/

70,00 EUR - 64,50 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.