iMX233-SJTAG Interface for OLinuXino

only 35,70 EUR instead 47,54 EUR

incl. 19 % VAT excl. shipping costs

weight: 0.0130 kg

Manufacturer: Olimex

In stock: 18

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Product.Nr.: 20110515
     

Product description

iMX233-SJTAG is an adapter which uses just two signals and transoforms them into normal JTAG interface. Using parallel JTAG is tricky as the parallel JTAG signals are shared with SD-CARD SPI signals and if you use parallel JTAG signals you will lose the SD-CARD. This adapter solves the problem. The adapter works both with commercial IDEs and OpenOCD.

FEATURES

  • Option for target powering via PWR_E jumper
  • Easy ways of powering the adapter - from an USB or a JTAG

SOFTWARE

HARDWARE

We can’t release this design as open source because we received private programming logic from Freescale under NDA, so the best we can do is just to produce this adapter at low-cost and make it affordable for all OLinuXino developers.

The output signals are as follows:

  • RED - PWR_E (disabled by default by an opened jumper with the same name)
  • WHITE - GND
  • GREEN - SJTAG_PSW
  • BLACK - SJTAG_DBG

Customers also purchased

ARM-JTAG-20-10 / 20 zu 10 Pin Adapter

ARM-JTAG-20-10 / 20 zu 10 Pin Adapter

5,89 EUR

A10-OLinuXino-LIME-BOX

A10-OLinuXino-LIME-BOX

5,95 EUR

A10-OLinuXino-LIME - 1GHz ARM Cortex-A8

A10-OLinuXino-LIME - 1GHz ARM Cortex-A8

35,70 EUR

iMX233-OLinuXino-SD - microSD-Karte

iMX233-OLinuXino-SD - microSD-Karte

only 3,57 EUR instead 11,84 EUR

3-12V / 0.6A Netzteil

3-12V / 0.6A Netzteil

5,95 EUR