Optisch / Licht / Bild


Weitere Kategorien

5MP MT9P111 1/4-Inch Kamera Modul

MT9P111 1/4-Inch 5MP System-On-A-Chip (SOC) CMOS Digital Image Sensor Camera Module

16,23 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

ArduCAM 2MP Mini Kamera Board - OV2640

ArduCAM-M-2MP is a high definition 2MP SPI camera, which reduce the complexity of the camera control interface. It integrates 2MP CMOS image sensor OV2640, and provides miniature size, as well as the easy to use hardware interface and open source code library.

28,50 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

ArduCAM 3MP Kamera Modul OV3640 (HQ Lens)

3 Mega pixel Camera Module OV3640 w/ HQ Lens

13,17 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

ArduCAM 5MP Mini Kamera Board - OV5642

ArduCAM-M-5MP is optimized version of ArduCAM shield Rev.C, and is a high definition 5MP SPI camera, which reduce the complexity of the camera control interface. It integrates 5MP CMOS image sensor OV5642, and provides miniature size, as well as the easy to use hardware interface and open source code library.

43,50 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

ArduCAM 5MP Spy Kamera Modul mit Flex Kabel für Raspberry Pi

In order to meet the increasing need of Raspberry Pi compatible camera modules. The ArduCAM team now released another add-on spy camera module for Raspberry Pi series boards which is fully compatible with official one.

34,00 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

ArduCAM 8MP Sony IMX219 Kamera mit CS Linse 2718 für Raspberry Pi

ArduCAM team just released a 8MP Raspberry Pi compatible camera based on the same Sony IMX219 image sensor. It’s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video. It attaches to Pi by the dedicated standard CSi interface.

70,31 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

ArduCAM 8MP Sony IMX219 Kamera mit M12 Linse LS40136 für Raspberry Pi

ArduCAM team just released a 8MP Raspberry Pi compatible camera based on the same Sony IMX219 image sensor. It’s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video. It attaches to Pi by the dedicated standard CSi interface.

64,90 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

ArduCAM MT9J001 10MP Kamera

10MP camera header board now is available from ArduCAM, it is Monochrome camera based on a ON-Semi (former Aptina) 1/2.3″ MT9J001 RAW sensor. This camera header board provides low noise images for outstanding value in a broad range of industrial applications.

47,60 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

ArduCAM Multi-Kamera Adapter Board für Arduino

ArduCAM-Mini multi-camera adapter board is designed for using up to 4 ArduCAM-Mini camera boards on a single microcontroller including the Arduino, BeagleBone Black and Raspberry Pi platform. The adapter board can be well mated with these popular open source ardware platform but not limited to them, you can also connect this adapter board to any platform you are familiar with as long as they have a free I2C and SPI interface.

16,00 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

GHI Seriell Kamera L1 Modul

This Serial Camera (SerCam) Module can stream JPEG images to any gadgeteer mainboard with socket type U. Mainboards with >1MB RAM and JPEG support can view these images on LCD screens, send images on network or save to SD cards or USB drives. Mainboards with less memory and no JPEG support can still use the camera to send images over network or save on SD cards or USB drives.

30,35 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

OV7670 Kamera Modul mit AL433 FIFO

The OV7670 is a low cost image sensor + DSP that can operate at a maximum of 30 fps and 640 x 480 ("VGA") resolutions, equivalent to 0.3 Megapixels. The captured image can be pre-processed by the DSP before sending it out. This preprocessing can be configured via the Serial Camera Control Bus (SCCB). It's very useful for Electronic lovers, you can use the camera with STM32 or even with Arduino.

14,50 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Pixy CMUcam Pan/Tilt Bausatz

Pan / Tilt System welches für die v1 Pixy Kamera entwickelt wurde.

Nur 23,80 EUR Statt 43,00 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Pixy2 CMUcam Pan/Tilt Bausatz

Pan / Tilt System welches für die Pixy2 Kamera entwickelt wurde.

30,00 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

Pixy2 CMUcam5 - optisches Erfassungssystem

Pixy ist ein schnelles optisches Erfassungssystem, welchem Sie recht schnell anlernen können, Objekte zu finden.

Es kann direkt an ein Arduino oder anderen Controller angeschlossen werden und eignet sich somit perfekt für Roboter oder andere Projekte, die eine optische Erkennung, benötigen

60,50 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

SparkFun JPEG Trigger - Kamera Adapter

Mit dem JPEG Trigger  und der LinkSprite JPEG Color Camera hat man eine einfache Möglichkeit geschaffen Bilder der Kamera auf einer MicroSD Karte zu speichern. Über ein externes Signal wird ein Interrupt ausgelöst, darauf wird ein Bild geschossen und auf der MicroSD abgelegt.

DEV-10549

Nur 16,66 EUR Statt 27,06 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

TCS3200 Farbsensor-Modul

TCS3200 chip is designed to detect the color of light incident on it. It has an array of photodiode (a matrix of 8x8, so a total 64 sensors).

5,00 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.

TSL237-S-LF-ND

IC LIGHT TO FREQUENCY CONV 3PIN

2,38 EUR incl. 19 % USt zzgl. Versandkosten

Lagernd, versandfertig in 24 Stunden.